DescriptionAdvantagesThe product exhibits the following features and benefits:A solution of high purity Chlorine dioxide is created in minutes.Each 40g tablet treats 1,000 litres of water. For higher volumes simply add more tablets.Strong and durableCompact and easy to use tablet.Ideal to meet requirements for small to medium quantities of chlorine dioxide.Limited waste – make as much chlorine dioxide as you need.Requires no equipment or additional precursor chemicals.Highly effective for microbiological control including biofilm and against Legionella bacteria.ApplicationRemove all chemical feeders from the hot tub prior to application of Chlorogene T25.Ensure the water is circulating before adding Chlorogene T25 to the water.Remove covers before application.Remove cartridge filter(s) prior to application of Chlorogene T25.Turn on the circulation (pumps) and open all diverter valves.Wearing protective gloves and eye protection remove Chlorogene T25 from the foil pouch (add 1 or 2 tablet(s) directly to the skimmer weir/filter housing. The tablet will dissolve in approximately 1 minute (water temp 360C).In some cases, after a few minutes, the water may turn cloudy; this indicates Chlorogene T25 has removed stubborn deposits held within the internal pipework (including biofilms) if this happens then add a further Chlorogene T25 tablet and then drain the water after 15 minutes and refill. This will subside in time, it’s an indication the internal pipework is dirty (presence of Biofilms).As an ongoing maintenance regime, add Chlorogene T25 prior to each drain down of hot tub water.Use Chlorogene to re-commission the water prior to use with Cartridges filters in-situ.Always use a primary sanitiser such as chlorine or bromine in an in-line feeder, but remove when applying Chlorogene T25 to the water.
